Do you have questions?
+49 6201 84603-0
-
Deutsch
de
-
English
en
-
Español
es
-
Français
fr
-
Polski
pl
-
Русский
ru
Overview
Electrically heated
The electrical steam boiler for particularly high demands: All wetted parts are optionally available in stainless steel. Heating rods are modulation controlled and manufactured in accordance with the DIN EN standard for electrical steam boilers. The EDI electrical steam boiler is also available as a compact unit, including a feed water tank and feed water pump.
- Outputs from 20 kW to 120 kW as a single unit steam system
- Higher outputs in the form of multiple steam units possible
- Not subject to approval or monitoring in Germany and many other countries
- Stainless steel pressure vessel in large capacity steam boiler design
- Maintenance-friendly thanks to horizontal design
- Easy to operate, highly effective touch screen control – via JUMAG Connect Connection to PC, mobile end devices or control centres possible
How it works
The JUMAG electrical steam boiler works according to the functional principle of a shell boiler.
- Water supplied by a pressure pump is heated and evaporated in the pressure tank by heating rods.
- The heating rods are controlled depending on the steam pressure.
- Depending on the water level in the pressure tank, the feed water in the pressure tank is refilled via the boiler pump.
- The JUMAG electrical steam boiler is fully equipped with a feed water container and a feed water pump. Blow down vessel and water treatment can be connected optionally.
- The working pressure is continuously adjustable between 0.3/3 bar and 11 bar, depending on the version.
Technical data
| Boiler type | EDI20 | EDI40 | EDI60 | EDI80 | EDI100 | EDI120 |
| Operating pressure (blow-of pressure relief valve) PED 2014/68/EU category at (PS*V < 200) |
5,3 barg | 3,4 barg | 2,6 barg | |||
| Operating pressure (blow-of pressure relief valve) PED 2014/68/EU category III at (PS*V < 1000) |
12,5 barg | |||||
| Steam output up to (at 15°C feed water temperature) |
26,5 kg/h 0,44 kg/Min |
53 kg/h 0,88 kg/Min |
80 kg/h 1,32 kg/Min |
106 kg/h 1,77 kg/Min |
132,5 kg/h 2,2 kg/Min |
160 kg/h 2,64 kg/Min |
| Heat output | 20 kW | 40 kW | 60 kW | 80 kW | 100 kW | 120 kW |
| Max. operating pressure | 0,3 barg - 11 barg | |||||
| Heating time | 15 Min | 7,5 Min | 8 Min | 6 Min | 6,5 Min | 5,5 Min |
| Volume pressure vessel | 37,7 Liter | 58,8 Liter | 76,7 Liter | |||
| Low water level (STB) | 14,3 Liter | 31,5 Liter | 40,5 Liter | |||
| Power supply | 400 V / 50Hz | |||||
| Power supply value | 22,2 kW | 42,2 kW | 62,2 kW | 82,2 kW | 102,2 kW | 122,2 kW |
| Pre-fuse customer-side | min. 35 A - max. 63 A |
63 A | min. 100 A - max. 125 A |
125 A | min. 160 A – max. 200 A |
200 A |
| Net weight | 190 kg | 190 kg | 250 kg | 250 kg | 300 kg | 300 kg |
Legend dimensions Feed water tank/condensate vessel
Dimensions
| With feed water tank/ condensate vessel |
EDI20/40 | EDI60/80 | EDI100/120 | Without feed water tank/ condensate vessel |
EDI20/40 | EDI60/80 | EDI100/120 |
| Total height A1 | 1.798 mm | Total height A2 | 1.040 mm | 1.105 mm | 1.120 mm | ||
| Total width B | 765 mm | 1.176 mm | 1.430 mm | Total width B | 765 mm | 1.176 mm | 1.430 mm |
| Total depth C1 | 703 mm | Total depth C2 | 673 mm | ||||
| Minimum charging height D1 | 1.798 mm | Minimum charging height D2 | 1.040 mm | 1.105 mm | 1.120 mm | ||
| Minimum charging depth E1 | 703 mm | Minimum charging depth E2 | 673 mm | ||||
| Minimum height setup space G1 |
2.000 mm | Minimum height setup space G2 |
1.200 mm | ||||
| Minimum width setup space H |
1.265 mm | 1.676 mm | 1.930 mm | Minimum width setup space H |
1.265 mm | 1.676 mm | 1.930 mm |
| Optional maintenance space H* |
- | 500 mm | Optional maintenance space H* |
- | 500 mm | ||
| Minimum depth setup space I1 |
1.463 mm | Minimum depth setup space I2 |
1.433 mm | ||||
Downloads
We have compiled a number of documents in our Download Centre that provide you with important information about JUMAG's products and services.